Shisha Setup
|  | 1. Fill the vase so that the stem of the Shisha is submerged approximately one inch in the water. Using ice in the glass is very common; it makes the smoking experience more cool and soothing. |  | 2. Place the metal argile on top of the vase. You should have a gasket to help seal the two together making it air tight. |  | 3. Place the tray over the top of the argile head. The tray will not fit over most heads, so you'll need to place it on first. The opening for the tray will usually be a bit wider than the neck of the argile. |  | This is what your Shisha should look like. |  | 4. Attach the hose gasket to the end of the hose. Place the end of the hose with gasket into the hose opening of the argile. |  | Shisha setup with hose. |  | *Packing the bowl, takes a little practice to get it perfect. 5. Brake up the flavour so it sets lightly in the bowl. If it is packed too dense, it will not allow smoke to be pulled through the head. Fill the head to the rim of the bowl and no higher. If you over fill the head, the flavour will become too packed when placing the foil or metal screen over the top. |  | 6. When placing foil over the top, get a square piece of foil that is approximately 3 X 3 inches. |  | 7. Place the foil over the top of the head like the picture shown on the left. |  | 8. Poke holes in the foil. A thumb tack or toothpick works best. |  | *Setup of shisha with hose and head. |  | 9. Lighting coals - If you have instant light coals, a lighter will work. Burn the coal all the way around so when you blow on the coal, a red glow covers the entire piece. You can not directly apply flame to the tobacco or use BBQ charcoals for the head. A lot of BBQ charcoal gives off too much carbon monoxide which can cause headaches and even death. Use only shisha charcoals. |  | 10. Carefully place the charcoal on top of the shisha head so that you don't drop ambers into the shisha. *If the shisha smoke becomes harsh, you may have too many coals on the head. Try removing a coal or breaking a coal into two to distribute heat better. If the shisha is still smoking harsh, ambers may be in the bowl. Remove coals and cover so that you can blow out ambers. *If shisha starts to smoke too light, try dropping coals onto tray to clear off ashes. Replace coals onto hookah head. If you have any further questions, feel free to email us at WE BRING SHISHA TO LIFE! | | |
|
|
